Economical and Efficient Downpipe and Gutter Cold Roll Forming Machines

• After-sales Service: Engineer Installing
• Warranty: 1 Year
• Tile Type: Colored Steel
• Certification: CE, ISO
• Condition: New
• Customized: Customized
• Model NO.: Downpipe and Gutter Cold Roll Forming Machines
• Usage: Roof
• Transmission Method: Electric
• Item: Downpipe and Gutter Cold Roll Forming Machines
• Diameter: 100mm
• Shaft: 45# Steel
• Roller: Cr12 Steel with Quenching
• PLC: Delta
• Transmission: Chain
• Motor: 7.5kw
• Color: as Demand
• Thickness: 0.5mm
• Speed: 8-12m/Min
• Transport Package: Suitable for Sea Transport
• Specification: As design
• Trademark: RFM
• Origin: Hebei China
• HS Code: 84552210
• Production Capacity: 500sets/Year

Product Description

Economical and Efficient Downpipe and Gutter Cold Roll Forming Machines

 

Product Description

Down pipe machine or Downspout forming machine make precise and well sealed roof drain pipe, leader is a pipe for carrying rainwater from a rain gutter

The downpipe forming machine we produce is customized according to the specific requirements of customers, such as specification and raw materials. The machine is installed and tested before leaving the factory. After receiving the machine, the customer can start production once connect wires and tubes. We randomly send instructions to tell how to operate. Of course, we also have corresponding videos for reference. Technicians Can also be sent to customer factory for guidance and training if necessary.

 

Drawing /Profile

Product Parameters

1.Process 
Decoiler --Forming  --cutting --stand

 

2.Rain Gutter Downspouts & Downpipes Roll Forming Machine
Direction for use
Downspout roll forming machine
1.Put all necessary parts on the right location,make the ground falttening.
2.Connect electric wires,use 6-8 mm² support line and keep grounding.
3.Fill hydraulic oil in the pump.not too full,three quarters are ok.
4.Feed raw materil into the machine slowly,make it run smoothly then automatic.
5.Pay attention to final sheet collection,do not scretch it or hurts people.

Description of application effect
1.The whole line working speed is about 15m/min.,max working speed could be 30-50 meters per minute.
2.Feeding material width should be confirmed before machine design .the width are changeable,
3.Material thickness normal range are 0.4-0.6mm.if you have any special request on material thickness,we should discuss in advance .
4.Both three and four waves are suitable for the line.we can design the machine based on buyer's profile drawing.
5.Final sheet embossing is available.we can different embossing rollers on various pattern and drawings.
6.Hydraulic pre-cutting are provided.
 

Machine Specifications
Weight	About 5000kgs
Size	About 11m x 1.2m x 1m (length x width x height)
Color	Main color: blue
	Warning color: yellow
Suitable Raw Material
Material	Galvanized Steel Coils
Thickness	0.5-0.8mm
Coil width	325mm
Yield Strength	235Mpa
Main Technical Parameters
Quantity of forming rollers stations	20-22
Diameter of forming rollers shafts	60mm
Roll Forming Speed	8-12m/min
Forming rollers material	No.45 steel, coated with chromed treatment
Cutter material	CR12 mould steel, with quenched treatment
Controlling system	PLC and Converter
Electric Power requirement	Motor of roll forming machine: 5.5kw
	Motor of sawing cutter: 3kw
	Motor of elbow machine: 1.5kw
Electric voltage	According to customer’s requirement
Main Components
Decoiler (manual and automatic for options)	1 set
Guiding device	1 set
Roll Forming system	1 set
Sawing Cutting system	1 set
PLC control box	1 set
Elbow machine	1 set
Run outs tables	1 set

Detailed Photos

 

Company Profile

Certificates: